On-Line Shop
 Home Up a Level Store Top Terms & Conds Search View Cart Checkout Contact Us Login

Other Glues

On-Line Shop > Adhesives > Other Glues
Formula 560 Canopy Glue Formula 560 Canopy Glue Ref: HM101
Fast drying and flexible
Price: £2.95


Quantity:  

Solarfilm PrymolSolarfilm Prymol Ref: HM100
Prymol is a colourless liquid for use on Solarfilm, Solarspan, metals and some other plastics as an etch primer. After drying it improves the adhesion of many iron-ons, adhesives and paints to the treated surface. Applied to Solarfilm before applying an overlapping piece of Solarfilm, the overlap seam will be stronger, it will resist the entry of fuel and its edges will not lift even after long use.
Apply Prymol with a small pad of cloth or tissue. Use enough to moisten the surface, then allow to dry for a few minutes.
When spraying paint, mask off as normal, spray a thin coat of Prymol, allow to dry and spray the paint as normal.

110 ml tin.

Price: £4.35


Quantity:  

Red Devil One Time Filler - 250mlRed Devil One Time Filler - 250ml Ref: HM005
Red Devil ONETIME Filler - 250ml

Repairs cracks and holes in most surfaces with just a single application. Works especially well for filling large holesDoes not crack, shrink, or sag and requires little or no sanding. Apply in seconds, paint in minutes.



Price: £4.95


Quantity:  

ZAP Canopy GlueZAP Canopy Glue Ref: HM010
Formula 560 Canopy Glue The world's best canopy glue. Works on all materials, and dries clear.

Price: £2.95


Quantity:  

BalsalocBalsaloc Ref: HM015
Use this excellent preparation to improve the adhesion of most iron-on covering films to difficult surfaces e.g. ply or to attach Litespan or Fibafilm. Safe to use on plastic foam.
Price: £4.10


Quantity:  

Titebond Original Aliphatic 4ozTitebond Original Aliphatic 4oz Ref: HM020

Price: £2.50


Quantity:  

Titebond Original Aliphatic 8ozTitebond Original Aliphatic 8oz Ref: HM025

Price: £3.95


Quantity:  

Westbury 2000 PVA 190mlWestbury 2000 PVA 190ml Ref: HM035
Rapid PVA Fast setting premium grade PVA for modellers. Sands easily.


Price: £2.95


Quantity:  

Westbury Hobby & Craft PVA 125mlWestbury Hobby & Craft PVA 125ml Ref: HM042
Westbury Hobby & Craft PVA 125ml
Price: £1.95


Quantity:  

Titebond Polyurethane Glue - 118mlTitebond Polyurethane Glue - 118ml Ref: HM045
Titebond Polyurethane Glue - 118ml
Now at last waterproof one-shot adhesive. High strength for all materials including metals, ceramics, plastics, Corian, stone etc..

Price: £7.95


Quantity:  

Spray Adhesive - 500mlSpray Adhesive - 500ml Ref: HM050
Only available with our EPP Kits due to shipping restrictions.
Price: £4.75


Quantity:  

Clearcoat 110ml TinsClearcoat 110ml Tins Ref: HM055
Synthetic resin solution. Dries to a transparent, colourless, glossy, flexible, fuel-resistant coating. Used for sealing wooden surfaces in engine bays, tank bays, wing-seat areas (and anywhere there will be fuel or fuel residues) BEFORE covering the model with an iron-on covering. When the covering is applied , the adhesive and the dried Clearcoat melt and fuse together forming a seal at the edge of the covering. This prevents fuel or oil getting under the edge of the covering. Even if some fuel or oil gets under the edge, the Clearcoat prevents it soaking into the wood. Also applied on Solartex - one coat for a satin finish - further coats add more gloss. Clearcoat must not be used on enamels - it softens them. It contains solvents that destroy most plastic foams.
Price: £4.25


Quantity: