Description

The Synergy Duet is the replacement for the Synergy Sport (one of our most successful models ever). The all new much slimmer fuselage has full length ply fuselage sides with a plywood top and bottom forward of the wing trailing edge. This plywood box is then clad in EPP before being covered in the normal (EPP) way with crossweave filament tape. This composite easy to build structure offers the best of both worlds i.e. 'wood' rigidity coupled with EPP durability. The wing has also undergone extensive structural redesign as it now features a substantial full depth mainspar. This not only makes the wing stronger and stiffer but quicker to build! The net effect of these changes is a model with improved light lift performance, a wider aerobatic reportiore, a shorter build time and the ability to fly in significantly stronger winds without the aid of ballast and yet still retain the qualities so admired in the original Synergy Sport.

Two versions of the Synergy Duet are available. A rudder elevator TRAINER version and the SPORT version with ailerons / flapperons. An aileron wing conversion kit is available to upgrade the TRAINER to the SPORT. The Duet Sport is a model that will not only satisfy the less experienced flyer but also the more advanced flyer when conditions etc. are not suitable for flying higher performance / more expensive models.You will be more than impressed with its capabilities! The perfect aileron trainer / sports aerobatic sloper. A worthy follow-on from the FunStart

The Duet Sport can be built as a basic three channel rudder elevator aileron model using a single standard servo to operate the ailerons or fitted with twin aileron metal geared micro servos. The later offers several advantages, one being less suseptibility to damage on landing and the second to significantly improve the performance of the model by using the ailerons as flaperons and coupling them with the elevator with the aid of a computer tramsmitter. With this set-up the Duet is capable of flying inverted and performing outside loops.

The quick build time and improved crash resistance has taken a lot of the heartache out of model flying. Synergy is a follow on from our FUN-Start basic trainer. Synergy will also be available in due course with a sports aerobatic wing.

R/C Equipment.

• Square Rx battery,
• Rudder / Elevator - 2 Standard servos.
• Ailerons - 1 standard servo or 2 metal geared micros (HS81MG) strongly recommended.
• Switch harness & 1/2 servo extension leads or Y lead for non-computor Transmitters
• 4/6 channel Rx

Additional Materials Required

• 12 minute 2 part Epoxy,
• Runny Superglue,
• Spray Impact Adhesive
• Sellotape Diamond (Aileron hinge - Duet Sport)
• Final covering material (Coloured Vinyl tape)

All the items required to build the Synergys including the radio equipment can be purchased from PMP.