Description

PEPPI is designed to take the raw beginner from their first tentative steps in radio control model flying up to BMFA 'B' certificate standard without a lot of the anxiety associated with more conventionally constructed models. EPP, as most modellers know, is a very resilient material and models built using it take an awful lot of punishment before they finally break. Designed around the economically priced 20 to 32 cu in (3.2cc - 5.3cc) sized engines PEPPI is capable of a wide range of aerobatic manoeuvres including loops rolls and sustained inverted flight. Another bonus in addition to PEPPI's 'bounceability' is the relatively short build time over equivalent wood / foam kits. The economically priced, fully furnished kit contains all the necessary hardware (tank, wheels engine mount etc.) and the base covering tape.

Two versions of the kit are available; a Basic Trainer version (rudder elevator only) and Sports version (rudder, elevator and ailerons). An aileron wing kit is also available for those wishing to upgrade from the basic trainer to sports version at a later date.

R/C Equipment.

• Flat Rx battery,
• Rudder / Elevator - 3 Standard servos.
• Ailerons - 1 standard servo.
• Switch harness & servo extension lead
• 4 channel Rx

Additional Materials Required

• 12 minute 2 part Epoxy,
• Runny Superglue,
• Spray Impact Adhesive
• Final covering material (Coloured Vinyl tape)

All the items required to build the Peppi including engine and radio equipment can be purchased from PMP.