PhoenixMP Oh dear, you found us !
mail@phoenixmp.com | Telephone/Fax: +44 (0) 1626 332287
 
Click on fast link above or

Shopping

Please click for On-Line Shop

PMP On-Line Shop

Select a Model

About Us

Read about PMP's history and philosophies

What We Sell

View a full listing of products sold by PMP

Shopping at PMP

An overview of shopping at PMP

Come Visit Us

We are always happy for modellers to drop in and shop. Here are directions, give us a call to let us know you're coming.

Agents/Suppliers for:-

 

Kerfuffle

EPP Power Sports Aerobatic Model

For Current price see Prices

Description

Following on from the success of the PEPPI is the KERFUFFLE a low wing sports aerobatic EPP model for 25 to 46 size engines. The Kerfuffle is an attractive model with a Cap / Extra look about it and from a short distance it is not immediately recognisable as EPP! With the economically priced MDS 38 as the power unit the performance is eyecatching! Snappy rolls, horizontal eights, inverted spins knife edge etc. etc. are all within its capabilities. Touch and goes are a real pleasure as ground handling is excellent. Being EPP and having EPP durability Kerfuffle encourages you to practise those manoeuvres you would think twice about with a wood / foam model - safely of course! For those modellers graduating from their high wing trainers the performance on an MDS 28 is more than adequate. Build time is a quarter to a third that of an equivalent wood / foam kit.

On a personal note it is a long time since I became really besotted with flying a model but the Kerfuffle has been known to drag me away from going sloping when the wind was perfect!

PS It will even have a cowl.

PPS. Prototypes have been proof tested! Result - 5 'arrivals' 3 broken props 2 damaged cowls, 2 broken tailskids (now 3mm instead of 1.5mm ply)! and we are very pleased with the MDS engines.

 

Specification

Type:      Cat 3
Span:     1295mm 
Controls: Rudder Elevator Ailerons Throttle
Av Wt.    1550gms
Section:  Modified Eppler 374

R/C Equipment / Engine.

  • Flat or Square Rx battery,
  • 4 off Standard servos(a servo tray would help installtion).
  • 4 channel Rx
  • 25 - 53 cu in Engine (4 - 8 cc) MDS 28/38 recommened.

Additional Materials Required

  • 12 minute 2 part Epoxy,
  • Runny Superglue,
  • Spray Impact Adhesive
  • Final covering material (Coloured Vinyl tape)

All the items required to build the Kerfuffle including engine and radio equipment can be purchased from PMP.

 

 

 

Information

Top Slope Sites

New to slope soaring or want to visit a new site. Check out the PMP slope site listings.

What's On

See which shows PMP will be attending this year

The Phoenix Range

Read about the design principles behind the PMP range of models

Magazine Articles

Articles written by Stan Yeo for national magazines on a wide range of topics

EPP Instructions

On-line instructions on how to construct our EPP Models

Useful Links

Links to Club Sites and Product Information.